Stone Protector Solvent based Sealer for Rough, Absorbent Natural & Cast Stones

ConfiAd® is the brand name that is compound word made up of "Confident" and "Admirable". This means that we focus on supplying our "Reliable" and "Commendable" products to customers.

With this faith, we have supplied our products (Solid Surfaces, Adhesive for Solid Surfaces/Engineered Stones/Natural stones, Stone Care Products, Diamond Tools & Abrasives) to over 70 countries' customers until now.

For customers' convenience, we would like to supply "Solid Surfaces", 

"Quartz Surfaces", "Adhesive for Solid Surfaces/Engineered Stones/Natural Stones", "Stone care products", "Diamond Tools & Abrasives" at one time for their one stop shopping.

Stone Care Products

Enhancers

Color Restorer

Description

Color Restorer is ready to use solvent based sealer containing superior synthetic resin. Color Restorer is wet activated, water and oil resistant. Color Restorer is recommended for rough, porous, and absorbent natural and cast stones. marble polishing powder Supplier

Characteristics & Properties

·         Brightens faded stone

·         Water and dirt resistance

·         Weather-resistance

·         Patented: KP 10-1429888

·         Wet-effected

·         Allows the stone to breathe

·         No unpleasant odor

Technical data:

·         Appearance: liquid

·         Color: clear to pale yellow

·         Odor: characteristic

·         Coverage: approx. 10~30 m2 /L (107~322 ft2 /qt.)

·         Density: approx. 0.98 g/㎤ (8.17 lb/gal)

·         Flash point: 34 ℃ (93.2 ℉)

·         Reduction of water absorbency: approx. 90-95 %

Storage

Storage temperature: between 5℃and 30℃. Must be applied to material at temperature between 5℃ and 30℃

Method of Use:

1.       The surface to be treated must be clean and absolutely dry.

2.       Apply undiluted and even-treated with a paint-brush, roller, mop, or spray.

3.       Apply 161-322 ft2 /qt. (15-30 ㎡/L) color restorer on the surface

4.       Rub gently to favor the penetration and to remove eventual excess of product to avoid its drying on the surface. Abrasive Sand Paper manufacturer

5.       According to temperature allow surface to dry 3-4 hours.

6.       Drying is completed 24 hours after the application.

7.       Tools and excess treated surfaces can be cleaned with acetone.

8.       For very absorbent substrates or for more color restorer effect, more wet effect, a second application is necessary after 10-15minutes of first application.

Field of Use

Marble, slabs, slate, lime stone, granite, solid surfaces, engineered stone and concrete.